Smart 36V Lithium Battery Charger DC 12V to 43.8V 13A
- Input Voltage: 12V DC (9–16V)
- Output Voltage: 43.8V DC (CC/CV)
- Max Output: 13A / Waterproof IP67
- Topology: Synchronous Step-Up
Enterprise Product Portfolio
Featured Automatic Battery Chargers & Converters for Vaduz
Engineered to excel in demanding Central European micro-climates, from precision high-frequency switch-mode AC-DC chargers to wide-input DC-DC galvanic isolation units for commercial fleets, municipal e-mobility, and residential clean energy arrays.
600W Waterproof AC-DC LiFePO4 Charger
- Grid Input: 90–265V AC Universal
- Profiles: 14.6V / 29.2V / 58.4V
- Ingress Rating: IP65 Sealed Alloy
- PFC Factor: ≥ 0.98 Active PFC
Multi-Voltage 600W Marine & EV Charger
- System Chem: LiFePO4 / NMC Packs
- Output Rails: 12V, 24V, 36V, 48V
- Chassis: Die-Cast Extruded Heat Sink
- Compliance: CE, RoHS, EN 60335
400W Smart Alternator-to-Battery Charger
- Operating Input: 10–36V DC Alternator
- Regulation: 14.6V / 29.2V Stable CC/CV
- Logic: Smart Euro 6 Sensor Ready
- Sealing: Fully Potted Polyurethane
1500W Buck-Boost Converter & Charger
- Ultra-Wide In: 10–60V DC Seamless
- Adjustable Out: 12V / 24V / 28V / 48V
- Interface: RS485 / Modbus RTU
- Cooling: Integrated Thermal Sink
Isolated Industrial Power Supply 120W
- Dielectric Barrier: 1500V DC Galvanic
- Input Ranges: 18–36V / 36–75V DC
- Output: 24V DC @ 5A Ripple <50mV
- Environment: -40°C to +85°C Rated
24V to 12V 100A Heavy Vehicle Regulator
- Continuous Amps: 100A / 1200W Rating
- Efficiency: > 96% Synchronous
- Protection: OVP, OCP, OTP, Rev-Polarity
- Enclosure: IP68 Heavy Aluminium
Custom 1000W IP65 Fleet Battery Charger
- Custom Range: Up to 1000W Continuous
- Input Mains: Single Phase / 3-Phase Opt.
- CAN/RS485: BMS Protocol Mapping
- Turnaround: Rapid Sample Validation
Technical Whitepaper
Autonomous Multistage Charging Architectures for Extreme Altitudes
Standard commercial chargers frequently malfunction under the severe thermal excursions and low-humidity alpine conditions characteristic of the Rhine Valley basin and Vaduz elevation bands. Shenzhen Eltrum Electronic Co., Ltd. resolves these failure modes through algorithmic charging cycles and advanced thermal dissipation.
| Charging Stage | Operational Dynamics | Voltage / Current Modulation | Lithium Battery Health Protection Target |
|---|---|---|---|
| 1. Soft-Start Conditioning | Pre-qualification of deeply discharged cells | 0.1C to 0.2C Constant Current limit until cell > 2.8V | Prevents thermal runaway and internal dendrite rupture |
| 2. Bulk Stage (Constant Current) | Maximum energy delivery through synchronous rectification | 100% rated current up to Absorption Knee (e.g. 14.4V / 57.6V) | Minimizes downtime while monitoring thermistor feedback |
| 3. Absorption Stage (Constant Voltage) | Precision voltage regulation within ±0.5% tolerance | Constant voltage held until current decays to ≤ 0.05C | Ensures cell-to-cell BMS balancing without over-stress |
| 4. Alpine Maintenance / Float | Periodic pulse monitoring or dormant voltage standby | Automated sleep cycle or controlled low-voltage retention | Prevents parasitic drain in storage during cold sub-zero winters |
Active Power Factor Correction (PFC)
Our automatic chargers integrate active PFC controllers achieving λ ≥ 0.98, fully compliant with the stringent European low-harmonic standard EN 61000-3-2 enforced by the Liechtenstein Office of Communications (AK).
- Significantly decreases reactive power losses
- Eliminates mains harmonic distortion on clean municipal microgrids
- Operates smoothly from dirty portable generator power in remote passes
Vacuum-Encapsulated Polyurethane Potting
Each unit features complete hermetic sealing using two-component thermal-conductive resin, safeguarding sensitive MOSFET drivers against condensation, road salt, and condensation loops caused by rapid elevation shifts.
- Exceeds IEC 60529 IP65 and IP67 industrial waterproof ratings
- Structural shock and vibration dampening up to 5G acceleration
- Corrosion-resistant anodized aluminium alloy chassis
Synchronous Step-Up/Down Topologies
Whether sourcing from fluctuating solar arrays or variable Euro 6 alternators, our high-frequency synchronous DC-DC switching platforms achieve up to 96.5% thermal efficiency, minimizing wasted wattage inside compact vehicle bays.
- Seamless automatic buck-boost transitional stability
- Programmable low-voltage cut-off to protect starter battery banks
- Galvanic isolation options to eliminate hazardous ground loops
Regional Infrastructure
Targeted Applications Across the Principality of Liechtenstein
From Vaduz's advanced commercial automation districts along the Rhine to high-altitude municipal works in Malbun, power conversion hardware requires strict precision, zero electrical noise, and high cold-temperature reliability.
Alpine Municipal & Electric Public Utilities
Vaduz and neighboring municipalities are modernizing local maintenance, waste haulage, and passenger mobility fleets with electric utility platforms. Our waterproof AC-DC chargers (300W to 1000W) deliver overnight depot charging and rapid curbside top-ups, enduring snowmelt, wash-downs, and freezing winter temperatures without downtime.
- Standardized IEC plugs and industrial screw terminals
- Cold-crank compensation logic down to -30°C
- High MTBF exceeding 50,000 continuous hours
Industrial Robotics, Intralogistics & AGVs
Liechtenstein's renowned manufacturing and tooling facilities rely on Automated Guided Vehicles (AGVs) and autonomous warehouse shuttles. Our isolated DC-DC converters and high-current automatic battery chargers provide non-disruptive opportunity charging and reliable 24V/48V bus stabilization to ensure factory floor uptime.
- Galvanic isolation isolates drive motors from sensitive PLCs
- Optional RS485 communication for real-time state-of-charge feedback
- Compact footprint designed for automated rack mounting
Alpine Off-Grid Telecom & Solar Buffers
Critical telecommunication repeater towers situated along mountainous ridge lines rely heavily on intermittent solar and battery buffer storage. Eltrum's wide-input buck-boost converters and LiFePO4 chargers bridge erratic solar voltage dips, sustaining a constant 12V, 24V, or 48V power line under continuous operation.
- Input tolerance spanning 8V to 90V DC on specialized architectures
- Low quiescent current draw minimizing self-discharge in winter
- Integrated over-voltage and thermal shutdown safeguards
Strategic Market Insights
Energy Transition Trends in the Vaduz Industrial Corridor
As Liechtenstein pushes toward carbon neutrality and strengthens circular economic frameworks under European Green Deal convergence, procurement specifications for power electronics are changing significantly.
1. Complete Migration to LiFePO4 Chemistry
Traditional lead-acid and AGM battery storage systems are rapidly disappearing from industrial tender specifications across the upper Rhine Valley. High energy density, thermal safety, and superior cycle life (3,500+ cycles) make Lithium Iron Phosphate (LiFePO4) the standard requirement. This requires automatic chargers with precise CC/CV charging algorithms, tight cut-off thresholds, and dedicated BMS wake-up pulses.
2. Strict Harmonization with Swiss-EU Directives
Because of Liechtenstein's EEA membership and close customs union with Switzerland, industrial goods must strictly comply with CE markings, RoHS 3 hazardous material restrictions, and the latest Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU. Suppliers must deliver verified test reports and consistent electromagnetic shielding to avoid operational delays.
3. Demand for Integrated Digital Telemetry (Modbus / CAN)
Automated manufacturing operations and smart logistics fleets in Vaduz no longer accept standalone "black-box" chargers. Modern installations require automatic battery chargers with built-in bidirectional communication (RS485 Modbus RTU or CAN bus). This allows central SCADA and facility energy management engines to actively throttle charging rates, read temperatures, and track cell status in real time.
Shenzhen Eltrum Excellence
Why Vaduz Engineers & OEMs Choose Our Power Conversion Platforms
Established in 2015, Shenzhen Eltrum Electronic Co., Ltd. operates a modern, onsite-verified production facility spanning over 3,000 square meters. We engineer high-reliability isolated DC-DC converters, dynamic buck-boost stabilizers, and hermetic automatic battery charging systems. Our direct-from-manufacturer model gives European commercial clients rapid prototype cycles, verified batch traceability, and full custom manufacturing flexibility.
ISO 9001:2015 Certified
Standardized quality management across incoming components, automated SMT, selective soldering, and final packing.
100% Full-Load Burn-In Testing
Every single charger is subjected to accelerated thermal burn-in under dynamic full-load cycles before global release.
Flexible OEM/ODM Customization
Customizable charging curves, specialized alloy housing formats, plug types (EU Schuko, CEE, Anderson), and CAN communication.
Low Sampling Threshold (MOQ 5)
Facilitating rapid R&D proof-of-concept testing with small minimum sample batches prior to volume supply commitments.
Procurement Knowledge Base
Frequently Asked Questions by Vaduz Engineering Teams
Detailed answers addressing regulatory compliance, electrical integration, logistical execution, and custom manufacturing for Liechtenstein-based technical buyers.
How do Eltrum chargers handle the wide temperature swings experienced in Alpine regions like Vaduz?
Our chargers integrate internal NTC temperature sensors coupled with active firmware monitoring. In high-altitude or enclosed vehicle battery boxes, the charger actively monitors ambient temperatures, scaling back charging rates to prevent lithium plating below 0°C, or throttling overall thermal output if temperatures rise under heavy workloads. In addition, our vacuum-potted polyurethane encapsulation prevents trace moisture condensation that often occurs when moving vehicles between warm indoor depots and freezing exterior mountain air.
Do your automatic chargers satisfy European Union and Swiss CE / EMC standards?
Yes. All standard automatic battery chargers and DC-DC converters manufactured by Shenzhen Eltrum Electronic Co., Ltd. are engineered to satisfy the European EMC Directive (2014/30/EU), the Low Voltage Directive (2014/35/EU), and RoHS 3 standards (EU 2015/863). Our switch-mode topologies incorporate high-grade EMI filtering chokes and shielded aluminium enclosures to ensure zero high-frequency disruption to sensitive communications equipment or industrial controllers. Official test certificates can be provided during sample qualification.
Can your chargers automatically wake up deeply discharged LiFePO4 batteries with a triggered BMS?
Yes. A common issue with lithium battery banks is that internal Battery Management Systems (BMS) enter low-voltage protection mode when fully discharged, reading 0V at the exterior terminal posts. Standard smart chargers misread this as an open circuit or defective battery and refuse to initialize. Eltrum chargers feature an automated zero-volt wake-up impulse that injects a small, controlled trickle current to activate the BMS circuitry before smoothly transitioning into normal constant-current (CC) bulk charging.
What typical shipping lead times and commercial terms apply for deliveries to Liechtenstein?
We regularly ship to European destinations including Liechtenstein and Switzerland via air courier (DHL, FedEx, UPS) for engineering prototypes and fast-track orders, typically arriving within 5 to 8 business days after dispatch. For volume wholesale orders, consolidated air freight or sea freight to European gateways (followed by overland transit via Zurich directly into Vaduz) is fully supported under standard Incoterms including EXW, FOB, and CIF. We accept international T/T, PayPal, and verified escrow payment channels.
Is it possible to customize the output voltage profile and connector termination for OEM equipment?
Yes. We offer complete OEM and ODM customization. You can define specific charging voltages (e.g., custom 14.6V, 29.2V, 43.8V, 58.4V, or bespoke intermediate thresholds), adjust continuous current limits, choose specific wiring harnesses (such as Anderson Powerpole, Amphenol, waterproof Deutsch connectors, or M8 ring terminals), and tailor chassis mounting profiles to fit into your existing enclosures. Buyer-label branding and custom silk-screened serial identification are fully supported.
What is the difference between your DC-DC battery chargers and standard step-up/step-down converters?
A standard DC-DC converter regulates output voltage at a fixed point, which can cause severe overload if connected directly to a flat battery, as the battery will attempt to pull maximum current beyond the converter's limits. A dedicated DC-DC battery charger features full three-stage charging logic (Constant Current, Constant Voltage, and Floating/Standby), actively limiting current draw from starter alternators while safely regulating charge rates into house auxiliary batteries according to their specific chemistry requirements.
Accelerate Your Project with Direct Factory Engineering Support
Discuss your electrical requirements, request verified product datasheets, or initiate custom sample evaluations directly with our technical team in Shenzhen. We provide swift engineering feedback to support your developments across the Vaduz and Alpine industrial corridors.
Contact Us