Smart 36V 13A Waterproof LiFePO4 DC-DC Battery Charger
- TopologySynchronous Boost/Buck
- Input VoltageDC 10V–36V Dynamic
- Output Profile43.8V CC/CV @ 13A Max
- Ingress RatingIP68 Full Epoxy Enclosure
Precision Power Conversion
Recommended DC-DC Buck & Marine Power Systems for Western Norway
Deploying synchronous rectification topologies, cast-aluminum heatsinks, and comprehensive galvanic protection designed to bridge high-voltage DC battery banks to sensitive subsea and onboard electronics.
24V to 12V 85A/100A High-Current Heavy Marine Buck Regulator
- Input Range18V–35V Continuous DC
- Regulated Out12V / 13.8V @ 100A (1200W)
- ProtectionOCP, OVP, OTP, Reverse Polarity
- ChassisFinned Extruded Aluminum
48V to 24V 40A 1000W Industrial Automation Buck Module
- Input Window36V–60V Traction Range
- Continuous Amps40A Continuous @ 24VDC
- Efficiency96.2% at Typical Load
- Operating Temp-40°C to +85°C Nordic Grade
30V-60V to 12V 50A/60A Synchronous Step-Down Stabilizer
- Target MarketFjord Hybrid Workboats
- Surge Rating720W Transient Suppression
- Ripple & Noise< 50mVp-p Clean Rail
- Thermal MgmtIntegrated Cold-Plate Mounting
30V–90V Ultra-Wide Input to 24V 20A Traction Buck Unit
- Battery Match48V, 60V, 72V, 80V Banks
- Output Spec24V @ 20A (480W Stabilized)
- Standby Current< 15mA Low Quiescent
- IsolationSolid Non-Isolated Common Gnd
Galvanic Isolated 36V–75V to 24V 5A Subsea Telecom Converter
- Dielectric Strength1500VDC Galvanic Barrier
- GroundingIsolated Signal & Chassis Gnd
- EMC ComplianceCISPR 25 Class 3 Shielding
- ApplicationSonar, Hydrographic Sensors
1500W Dynamic Buck-Boost Converter with RS485 Bus Monitoring
- Input Range10V–60V Wide Tracking
- Voltage Output12V/24V/28V/48V Programmable
- Digital BusModbus RTU over RS485
- Peak Power1500W with Dynamic Throttling
400W Heavy-Duty IP67 Marine Dual-Battery Buck-Boost Charger
- Charge RegulationMicrocontroller CC/CV Curve
- Battery ProfilesLiFePO4, AGM, Pure Lead Gel
- Smart AlternatorEuro 6 / D+ Ignition Trigger
- EnvironmentalSalt-Spray Resistant Anodizing
Navigating DC Microgrid Realities across Vestland: The Criticality of High-Reliability Buck Topologies
The Bergen maritime and industrial corridor presents one of the world's most demanding physical and operational environments for power electronic components. From pure-electric car ferries traversing the Hardangerfjord to remote offshore aquaculture surveillance arrays in Sotra and Øygarden, low-voltage power networks operate under severe thermal swings, high humidity, constant vibration, and corrosive saline atmospheres.
Standard industrial off-the-shelf step-down converters frequently succumb to premature electrolytic capacitor drying, board-level creepage discharges, and cold-soak startup failure when ambient fjord winter temperatures plunge toward -25°C. As an original design manufacturer founded in Shenzhen in 2015, Shenzhen Eltrum Electronic Co., Ltd. addresses this engineering threshold directly. By deploying military-grade planar magnetics, multi-phase interleaved synchronous switching, and solid-state potted polyurethane matrix encapsulation, our DC-DC buck regulators offer true zero-maintenance operational longevity.
| Electrical & Environmental Parameter | Standard Commercial Buck Converters | Eltrum Engineered Nordic-Spec Buck Series |
|---|---|---|
| Operating Temperature Window | -10°C to +45°C (degraded below 0°C) | -40°C to +85°C (full cold-start qualification) |
| Enclosure Hermeticity & Moisture Protection | Conformal coating or vented sheet-metal (IP20/IP44) | Solid-state epoxy vacuum potting (IP67 / IP68 submersible) |
| Switching Element Architecture | Traditional Diode Free-Wheeling (82-88% Efficiency) | Synchronous GaN/MOSFET Rectification (>96% Efficiency) |
| Electromagnetic Interference (EMI) | Basic consumer filtering, high high-frequency ringing | Integrated Pi-Filter + Multi-layer Faradaic Shielding |
| Vibration & Mechanical Shock Tolerance | 1G to 2G standard industrial vibration limits | IEC 60068-2-6 test compliant up to 10G continuous shock |
When engineering DC distribution for hybrid workboats or aquaculture barges operating offshore out of the Port of Bergen, system integrators cannot afford thermal dissipation losses trapped inside unventilated, sealed equipment enclosures. A drop from 96% down to 88% efficiency in a 1.2kW step-down circuit does not simply represent wasted battery reserve—it equates to an extra 96 watts of parasitic heat that raises enclosure internal ambient temperatures past component ratings, inducing runaway failure.
Localized Deployments
Precision Power Delivery across Bergen's Strategic Industrial Sectors
Real-world integration points where our high-performance buck converter series deliver unyielding power stability for Norwegian naval architects, aquaculture engineers, and fleet operators.
Hybrid & Electric Fjord Vessels
Bergen leads global ferry electrification. Main battery banks deliver voltages from 400V down through auxiliary 48V or 72V DC rails. Our synchronous step-down regulators convert fluctuating battery voltages down to ultra-quiet 24V or 12V rails, supplying emergency navigation screens, AIS transponders, satellite comms, and LED bridge arrays without noise interference.
DNV Vibration ResistantOffshore Aquaculture Feed Barges
Salmon farming installations across the Vestland archipelago rely on automated feed cannons, underwater optical biomass cameras, and dissolved oxygen probes. Step-down buck converters from our 30V-90V series step high-voltage DC down to 24V automation buses, remaining completely impervious to high atmospheric salt content and deck-level seawater washing.
IP68 Full SubmersionSubsea ROVs & Autonomous Oceanographic Drones
Operating out of maritime clusters like CCB Ågotnes, deep-water inspection vehicles demand galvanic separation to defeat complex ground loops between propulsion thrusters and ultra-sensitive side-scan sonar arrays. Our isolated DC-DC buck units ensure zero signal drift and complete suppression of transient inductive spikes.
1500VDC Galvanic Barrier
Market Intelligence
Macro-Trends Driving Power Conversion Procurement in Bergen (2025–2030)
Why procurement directors across Western Norway are shifting away from intermediate European traders to partner directly with advanced Chinese original manufacturers.
Transition from Lead-Acid to 48V/72V LiFePO4
Commercial vessels and coastal installations are eliminating traditional lead-acid banks to meet Norway's strict zero-emission fjord legislation. Because lithium battery charge/discharge voltage plateaus vary drastically from old chemistry, advanced multi-stage buck converters and stabilizers are legally mandatory to protect legacy 12V and 24V marine navigation hardware.
Direct-Factory Supply Chain Optimization
Norwegian engineering budgets are facing rising supply chain margins charged by local distributors rebadging components. By sourcing directly from our Shenzhen production hub, integrators gain a direct engineering feedback loop, access to customized firmware parameters, and lower unit procurement costs for volume rollouts.
Rapid Modular Customization (OEM/ODM)
Modern electrification often requires niche specifications—such as a 58.4V LiFePO4 pack stepping down to exactly 13.8V for high-gain communications with RS485 Modbus telemetry. Standard off-the-shelf suppliers cannot adjust firmware or wire leads. Eltrum builds custom sample runs within 7–10 days from confirmed specifications.
Shenzhen Manufacturing Authority
Engineered in Shenzhen, Proven in 130+ Countries Worldwide
Shenzhen Eltrum Electronic Co., Ltd. (founded in 2015) has established itself as an engineering-driven powerhouse in high-power DC-DC buck, boost, isolated converters, and intelligent lithium battery charging solutions. Operating out of our modern facility in Shenzhen's Hangcheng Industrial Zone, our vertically integrated plant houses surface-mount technology (SMT) lines, custom high-frequency transformer winding bays, automated potting encapsulation cells, and multi-bay 100% full-load burn-in chambers.
- ISO 9001:2015 Registered: Full traceability across all semiconductors, passive components, and thermal interface materials.
- CE & RoHS Certified: Stringent electromagnetic compatibility (EMC) testing ensuring low EMI interference with bridge radars and radio suites.
- Flexible Procurement Terms: Low minimum order quantities (MOQ from 5 units for standard stock) enabling cost-effective sample qualification before mass fleet rollout.
- Full In-House Customization: Tailored voltage setpoints, multi-channel outputs, RS485 communication protocols, and bespoke mounting brackets for marine racks.
Procurement Due Diligence
Frequently Asked Questions by Norwegian Engineers & Buyers
Clear, direct answers regarding customs clearance, environmental ratings, galvanic isolation, and sample testing protocols.
How does Eltrum ship to Bergen and handle Norwegian import procedures?
We regularly ship to Norway under DAP (Delivered at Place) or DDP (Delivered Duty Paid) via express air couriers (DHL, FedEx, UPS) directly to Bergen addresses within 4 to 6 business days. For volume manufacturing runs, we provide sea-air combined freight or standard pallet ocean shipping straight to the Port of Bergen (Bergen Havn), complete with commercial invoices, packing lists, CE declarations, and Norwegian VOEC compliance documentation where applicable.
What is the difference between non-isolated and isolated buck converters for marine craft?
Non-isolated buck converters share a common negative ground between the input battery and the output load. They are cost-efficient, smaller, and achieve up to 96.5% efficiency—making them ideal for heavy DC loads like bilge pumps and lighting. Isolated buck converters use high-frequency planar transformers to physically break ground continuity, protecting sensitive hydrographic sensors, bridge navigational instruments, and telecom equipment from dangerous ground loops and cathodic electrolytic hull corrosion.
Can your buck converters withstand sub-zero winter temperatures in Vestland?
Yes. Every industrial model is built with cold-rated solid tantalum or ceramic SMD capacitors rather than liquid electrolytes that freeze and lose capacitance. Our thermal management encapsulation utilizes low-stress polyurethane resin that does not contract excessively or crack solder joints when cold-soaked down to -40°C, ensuring flawless instant cold-start operation during severe Norwegian winters.
What is the Minimum Order Quantity (MOQ) for prototypes and volume production?
For standard catalog items, our typical sample MOQ starts from just 5 units, allowing your engineering and R&D team in Bergen to conduct full test-bench verification without substantial capital commitment. High-power units (1000W+) can be sampled from 1–2 pieces. For customized OEM builds (such as customized cable harnesses or specific output voltages), volume batch production begins at 50 to 100 units.
How do Eltrum step-down converters prevent high-frequency EMI noise on VHF radios?
Electromagnetic interference is a critical concern on vessel bridges. Our converters integrate multi-stage LC input and output filter networks, solid ferrite toroidal chokes, and continuous cast-aluminum Faraday cages. This architecture contains high-frequency switching harmonics well within CE EMC Directive 2014/30/EU standards, avoiding static fuzz or ghost echoes on communication and echo-sounder frequencies.
What warranties and technical support channels do you offer to Bergen integrators?
We back our standard DC-DC converters with a 2-year factory replacement warranty. Our Shenzhen engineering design team works in direct contact with your technical staff via live chat, video conferences, or email. We can review your circuit schematics, verify inrush current limits, and provide step-by-step sizing calculations for complex dual-battery and hybrid DC microgrid topologies.
Accelerate Your Power Electronics Deployment in the Bergen Market
Direct manufacturer access, transparent technical parameters, factory-direct pricing, and complete custom engineering support. Request our comprehensive technical catalog, CAD files, and validation datasheets today.
Get Catalog