Smart 36V Lithium Battery Charger DC 12V to 43.8V 13A
- Input: DC 10V–16V
- Output: DC 43.8V @ 13A
- Ingress Rating: IP67 Waterproof
- Topology: Active Step-Up Boost
Industrial Power Modules
High-Performance Charging & DC Conversion Units
Pre-engineered charging solutions and wide-input power modules calibrated to meet Singapore's stringent safety frameworks and high humidity operating conditions.
600W Waterproof AC-DC Intelligent LiFePO4 Charger
- Mains Input: 90V–264V AC Universal
- Output Rails: 14.6V / 29.2V / 58.4V
- Efficiency: >93.5% Nominal
- Protection: OTP, OVP, Reverse Polarity
Multi-Platform 600W Industrial Fleet Battery Charger
- Target Chem: LiFePO4 / NMC Packs
- Platforms: 12V / 24V / 36V / 48V
- Enclosure: Die-cast Aluminum Heat Sink
- Compliance: CE, RoHS Certified
300W Salt-Spray Resistant Marine Lithium Charger
- AC Interfaces: UK Type G, EU, US Plugs
- Charge Curve: Precision 3-Stage CC/CV
- Potting: Full Polyurethane Thermal Fill
- Application: Port Crafts & Electric Tenders
1500W High-Density Buck-Boost DC Stabilizer Module
- Input Span: 10V–60V Ultra-Wide DC
- Regulated Out: 12V / 24V / 28V / 48V
- Telemetry: RS485 Modbus RTU
- Max Output: Up to 1500W Continuous
18–90V Input Isolated DC-DC Telecom Converter
- Isolation: 1500V DC Galvanic Barrier
- Output: 12V DC Regulated @ 10A
- Protection: Transient Suppression & OCP
- Sector: 5G Telecom & Automated Rail
24V to 12V Heavy-Duty 100A Step-Down Buck Converter
- Input Range: 18V–32V DC Continuous
- Current Cap: 85A–100A Heavy Duty
- Cooling: Internal Conduction Fin Array
- Target Fleet: EV Buses, Port Prime Movers
400W Multi-Stage Battery-to-Battery (DC-DC) Charger
- Wide Input: 10V–36V Alternator/Solar
- Profiles: 14.6V / 29.2V / 43.8V LiFePO4
- Smart Logic: Euro 6/Smart Alternator Safe
- Casing: Sealed Anti-Vibration Metal Housing
Singapore Field Engineering
Engineering Power Modules for Equatorial Urban Density
Deploying switched-mode power electronics in Singapore demands direct attention to tropical maritime salinity, persistent high ambient thermal envelopes, and regulatory safety frameworks.
Thermal De-Rating at 40°C Enclosures
Singapore operates under persistent equatorial ambient temperatures averaging 31°C to 34°C, where enclosed engine compartments or battery vaults easily exceed 55°C. Eltrum chargers employ planar magnetics and high-thermal-conductivity silicone potting (UL 94V-0 rated). This construction guarantees full-load rated power transfer up to 50°C before gentle linear derating occurs.
Thermal Conductivity: >1.5 W/m·K potting fill
Harbor-Front Salt Fog & IP67 Sealing
The maritime perimeter along Jurong Island, Keppel Terminal, and the Tuas Mega Port introduces high sodium concentrations in ambient humidity (often hovering near 90%). Non-hermetic modules experience rapid electrolytic dendrite growth across surface mount components. Our fully potted IP67 charger housings prevent moisture condensation and salt mist ingress.
Salt-Mist Tolerance: ASTM B117 validated
Galvanic Isolation & Noise Immunity
In high-density transit systems such as Singapore’s electric bus networks, MRT feeder systems, and industrial robotics installations, ground loops create severe signal degradation across CAN-bus and RS485 communication lines. Eltrum’s isolated DC-DC topologies incorporate high-voltage transformer barriers that safely separate input grounds from sensitive loads.
Dielectric Isolation: 1500V DC input-to-output
Market Trends
Macro Dynamics Driving Power Architecture in Singapore
A strategic overview of industrial initiatives shifting purchasing specifications across Singapore's advanced engineering sectors.
Green Plan 2030 Commercial Fleet EV Mandate
Under the Singapore Green Plan 2030, all new vehicle registrations must run on cleaner energy by 2030. Commercial fleet operators converting internal combustion prime movers and urban delivery vans require rugged DC-DC battery chargers (e.g., 24V/48V step-down to auxiliary 12V circuits) capable of seamless integration with smart alternators and lithium iron phosphate auxiliary banks.
Mandate Compliance: Euro 6 Smart Alternator logic
Harbor Craft Electrification at Tuas Port
The Maritime and Port Authority of Singapore (MPA) requires all new harbor craft operating in Singapore waters to be fully electric or capable of utilizing zero-emission fuels from 2030. Fast DC charge controllers, high-power buck-boost regulators, and isolated converters are critical components for onboard navigational arrays, winches, and auxiliary marine propulsion batteries.
Standards: Designed to align with SS 660 / MPA frameworks
Automated Warehouses & Intralogistics AGVs
Singapore serves as the logistics hub of ASEAN, hosting automated sorting hubs in Changi and Jurong. Modern Automated Guided Vehicles (AGVs) rely on compact 48V or 72V LiFePO4 architectures. Our wide-input 30–90V buck converters and automated charging modules supply ripple-free power to optical LiDAR, sensors, and steering servos without unexpected shutdown trips.
Ripple & Noise: <1% Vp-p under full dynamic swing
OEM / ODM Manufacturing Strength
Direct Engineering Partnerships from Drawing to Dock
Founded in 2015, Shenzhen Eltrum Electronic Co., Ltd. has grown into an internationally verified designer and manufacturer of high-reliability switched-mode power supplies, DC-DC converter modules, and multi-stage intelligent lithium battery chargers.
Operating an advanced 3,000 m² factory verified onsite by global third-party inspection firms, Eltrum delivers complete engineering control. Our deep domain expertise in isolated DC conversion topologies informs the design of all buck, boost, and buck-boost modules we export to Singapore and over 130 countries worldwide.
We provide full customization for systems integrators across Singapore: tailored input/output voltage windows, custom-tuned CC/CV charging curves for specialized LiFePO4/NMC cell chemistries, proprietary connector assemblies, integrated RS485 Modbus networks, and private-label production run with a standard sampling threshold starting at just 5 units.
● ISO 9001:2015
● CE Certified
● RoHS Compliant
● IP67 / IP65 Waterproof
Procurement & Integration FAQ
Frequently Asked Questions by Singapore Buyers
Direct answers covering logistical routing, technical specifications, and regulatory considerations for local project developers.
How fast can prototype samples and bulk shipments arrive in Singapore?
Because our core manufacturing facility is located in Shenzhen, just minutes from air and ocean freight hubs, expedited sample orders (1–5 units) delivered via DHL, FedEx, or air courier routinely arrive in Singapore within 2 to 4 business days. For volume manufacturing batches, direct sea-freight transit from Shekou/Yantian ports to the Port of Singapore typically requires only 4 to 6 days dock-to-dock.
Can Eltrum customize the charging algorithm for specialized marine LiFePO4 batteries?
Yes. Our internal firmware and hardware engineering team regularly calibrates constant current (CC), constant voltage (CV), and float cutoff parameters to match specific manufacturer specifications (such as 14.6V for 4S packs, 29.2V for 8S packs, and 58.4V for 16S arrays). Temperature compensation sensors and RS485 bus telemetry protocols can also be embedded directly into our waterproof aluminum casings.
When should an engineer specify an Isolated DC-DC converter instead of a Non-Isolated module?
Non-isolated buck or boost converters provide maximum conversion efficiency (>95%) and compact physical dimensions when input and output share a common chassis ground. However, an Isolated DC-DC converter is mandatory in telecommunications, rail, and marine operations where ground loops, high-voltage static transients, or potential shorts between positive and negative rails could permanently damage sensitive microprocessors or instrumentation.
How do Eltrum chargers maintain safety against Singapore's high line surges?
Singapore's localized power grid is subject to high-frequency transient spikes from nearby heavy port crane operations and tropical thunderstorm lightning activity. Eltrum chargers integrate high-energy metal-oxide varistors (MOVs), gas discharge tubes, and multistage LC input filters rated to suppress surges, ensuring complete compliance with CE EMC Directive 2014/30/EU and low total harmonic distortion (THD).
What documentation is provided to satisfy Singapore import clearances and audit audits?
Each commercial shipment is accompanied by complete ISO 9001 factory outgoing inspection sheets, Certificates of Conformity (CE), RoHS material declarations, and comprehensive engineering datasheets detailing electrical pinouts, terminal schematics, and efficiency versus thermal curves.
Connect Directly with Our Power Engineering Team
Accelerate your project integration across the Singapore market. Contact our technical desk to discuss custom input/output voltages, evaluate evaluation samples, or download complete system catalogs.
Get Catalog